NEWCOM, INC.

336IFX(C), 336IFXV(C)

Card Type

Modem (asynchronous)

Chipset

Unidentified

I/O Options

Voice (on 336ifxv(c) only)

Maximum Data Rate

33.6Kbps

Maximum Fax Rate

14.4Kbps

Data Modulation

Bell 103A, 212A

ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34

Fax Modulation

ITU-T V.17, V.21CH2, V.27ter, V.29

Error Correction/Compression

MNP5, V.42, V.42bis

Fax Class

Class I

Data Bus

16-bit ISA

Card Size

Full height, half length

CONNECTIONS

Function

Label

Function

Label

Telephone line out

CN1

Telephone line in

CN2

PLUG-N-PLAY

Setting

JP1/H

JP1/I

JP1/J

í Enabled

Closed

Closed

Closed

Disabled

Open

Open

Open

Note: If Plug-N-Play mode is enabled, all other jumper settings must also be set for Plug-N-Play.

INTERRUPT SELECTION

Setting

JP1/A

JP1/B

JP1/C

JP1/D

JP1/E

JP1/F

JP1/G

3

Open

Open

Open

Open

Open

Open

Closed

4

Open

Open

Open

Open

Open

Closed

Open

5

Open

Open

Open

Open

Closed

Open

Open

7

Open

Open

Open

Closed

Open

Open

Open

10

Open

Open

Closed

Open

Open

Open

Open

11

Open

Closed

Open

Open

Open

Open

Open

12

Closed

Open

Open

Open

Open

Open

Open

í Plug-N-Play

Closed

Closed

Closed

Closed

Closed

Closed

Closed

SERIAL PORT ADDRESS SELECTION

Setting

JP1/K

JP1/L

JP1/M

JP1/N

3F8h (COM1:)

Closed

Closed

Open

Open

2F8h (COM2:)

Closed

Open

Open

Closed

3E8h (COM3:)

Open

Closed

Closed

Open

2E8h (COM4:)

Open

Open

Closed

Closed

í Plug-N-Play

Open

Open

Open

Open

SUPPORTED STANDARD COMMANDS

Basic AT Commands

+++, ‘comma’, A/

A, C, D, E, F, H, L, M, N, O, P, Q, T, V, X, Y, Z

&C, &D, &F, &G, &J, &K, &P, &S, &T, &W, &Y, &Z

Extended AT Commands

\A, \B, \C, \G, \J, \N, \O, \Q, \T, \U, \X, \Y, \Z

%A, %C, %E, %G

Special AT Commands

-C, "H, -J, "O

S-Registers

S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S25, S27

S30, S31, S33, S37

Note: See MHI help file for complete information.

IS-101 COMMANDS

+V Commands

+VCID, +VCSD, +VDR, +VEM, +VGM, +VGR, +VGS, +VGT, +VIP, +VIT, +VLS, +VNH, +VRA, +VRN, +VRX

+VSD, +VSM, +VSP, #VSPS, +VTD, +VTS, +VTX

-S Commands

-SAC, -SCD, -SDA, -SDS, -SER, -SFX, -SIC, -SIP, -SQR, -SSP, -SSQ, -SSR, -SSV

Note: The functions of the IS-101 commands are unidentified.

These commands are supported on 336ifxv(c) only.

Proprietary AT Command Set

See NEWCOM, INC. 336IFXSP(C) for a full command summary.