KATRON TECHNOLOGIES, INC.

KF-221TX, KF-221TX/2

Card Type

Network Interface Card

NIC Type

Ethernet

Maximum Onboard Memory

Unidentified

Boot ROM

Unidentified

Network Transfer Rate

10Mbps, 100Mbps

Topology

Star bus

Wiring Type

Unshielded twisted pair

Data Bus

32-bit PCI

CONNECTIONS

Function

Label

UTP connector

CN1

NETWORK SPEED SELECTION

For 10BASE-T Ethernet networks, the Fast Ethernet adapter uses Category 3, 4, or 5 UTP cable. To establish a valid 10 Mbps connection, the cable must be connected to a 10BASE-T hub.

For 100BASE-TX Ethernet networks, the Fast Ethernet adapter uses Category 5 UTP cable. To establish a valid 100 Mbps connection, the cable must be connected to a 100BASE-TX hub.

DIAGNOSTIC LED(S)

LED

Status

Condition

LED1

On

100BASE-TX connection is selected and active

LED1

Off

100BASE-TX connection is not selected and active

LED2

On

10BASE-TX connection is selected and active

LED2

Off

10BASE-TX connection is not selected and active

LED3

Blinking

Network traffic is present and is transmitting/receiving

LED3

Off

Network traffic is not present and is not transmitting/receiving for either speed