S T 3 3 2 2 0 A M E D A L I S T SEAGATE Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | 6253| 751| 1024 Capacity form/unform 3227/ MB Heads 4| 16| | 16 Seek time / track 12.0/ 1.1 ms Sector/track | 63| 63| 63 Controller IDE / ATA3 ULTRA Precompensation Cache/Buffer 128 KB Landing Zone Data transfer rate 11.500 MB/S int Bytes/Sector 512 33.300 MB/S ext UDMA2 Recording method PRML 16/17,ZBR operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C | Power: sleep W Humidity % | standby 0.8 W Altitude km | idle 4.3 W Shock g 10 | 75 seek 5.5 W Rotation RPM 4490 read/write W Acoustic dBA spin-up W ECC Bit MTBF h 300000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** J U M P E R S ********************************************************************** SEAGATE ST33220A JUMPERSETTINGS Jumper Setting ============== J2 40 pin I/O Cable Connection | pin-20 removed | +----------|---------+-------1-+---------+ TOP (HDA) ---+::::::::::*::::::::1| : : : : | X X X X +---- +--------------------+-8-+-+-+-+-5-G-G-12+ BOTTOM | | | | Master ON, Slave OFF --+ | | | Slave Present (when Master ON) ----+ | | Cable Select (when Slave OFF) ----+ | | Reserved ------+ | Limit capacity --------+ Limit Capacity jumper sets the default cylinder translation to 4092 to solve issues with certain BIOS that only auto-detect. Total available sectors are still at full capacity as reported via Identify Drive data words 52-61. Third party partitioning software may be needed to achieve full capacity if this option jumper is used.