7 1 3 5 A V MAXTOR NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | 966| | Capacity form/unform 135/ MB Heads 1| 13| | Seek time / track 14.0/ 3.0 ms Sector/track | 21| | Controller IDE / ATA2 FAST/ENHA Precompensation Cache/Buffer 32 KB ON-BOARD Landing Zone Data transfer rate 3.000 MB/S int Bytes/Sector 512 MB/S ext DMA1 Recording method operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 50 | -40 71 Power: sleep 0.6 W Humidity % 5 95 | 5 95 standby 0.7 W Altitude km -0.061 3.048| idle 3.9 W Shock g 15 | 70 seek 4.2 W Rotation RPM 3551 read/write 4.2 W Acoustic dBA spin-up 15.1 W ECC Bit MTBF h 300000 Warranty Month 24 Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** MAXTOR 7135AV JUMPER SETTING +---------------------------------------------------------+ | J20******J25 | | COMPONENT SIDE ****** |XXI | |XXN | |XXT | |XXE | |XXR J1 | |XXF | |XXA | |XXC | |XXE | |XX | |XX | |XX | | 1 | |XX Power | |XX J3 +---------------------------------------------------------+ 1 ********************************************************************** J U M P E R S ********************************************************************** MAXTOR 7135AV JUMPER SETTING Jumper Setting ============== Jumper Designation ------------------ +---------------- J20 Master/Slave | +------------- J21 FACTORY RESERVED! | | +---------- J22 FACTORY RESERVED! * * * * * * * * * * * * | | +- J25 FACTORY RESERVED! | +---- J24 Cable Select +------- J23 Write Cache J20 Master/Slave ---------------- J20 CLOSED Only drive in single drive system (default) CLOSED Master drive in dual drive system (default) OPEN Slave drive in dual drive system J23 Write Cache --------------- J23 OPEN Write Cache enabled (default) CLOSED Write Cache disabled J24 Cable Select ---------------- J24 OPEN Cable Select disabled (default) CLOSED Cable Select enabled NOTE Jumpers J21 and J25 are factory reserved. A spare shunt is shipped between J23 and J24. DC Power connector ------------------ pin 1 +12 VDC pin 2 +12 Volts Return pin 3 + 5 Volts Return pin 4 + 5 VDC