K C 8 0 G A KYOCERA NO MORE PRODUCED Native| Translation ------+-----+-----+----- Form 3.5"/HH Cylinders 787| | | Capacity form/unform 80/ MB Heads 8| | | Seek time / track 28.0/10.0 ms Sector/track 26| | | Controller IDE / AT Precompensation Cache/Buffer 32 KB Landing Zone Data transfer rate 1.125 MB/S int Bytes/Sector 512 MB/S ext Recording method RLL operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C | Power: sleep W Humidity % | standby W Altitude km | idle W Shock g | seek W Rotation RPM read/write W Acoustic dBA 40 spin-up W ECC Bit MTBF h 28000 Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** KYOCERA KC-40GA/80GA PRODUCT DESCRIPTION +---------------------------------------------------------+ | |XX | +--+J3 |XX I | +-+RESERVED +--+ +-+J1 |XX N | +-+ +-+ |XX T | 1+--+ |XX E | | |J2 |XX R | | | |XX F | +--+ |XX A | |XX C | +-+ External |XX E | | | LED |XX | +-+ |XX | | | |XX Power | |XX +---------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** KYOCERA KC-40GA/80GA PRODUCT DESCRIPTION Jumper setting -------------- J1 LED ------- J1 can be shorted on the drive to control a common LED in a two drive installation. Only the jumper on the drive with the LED should be CLOSED. J2 & J3 Drive Select Jumpers ----------------------------- +---------------------------------------+---------------+--------+ |Drive Select | J2/jumper 1 | J3 | +---------------------------------------+---------------+--------+ |Only drive in the system | OPEN | CLOSED| +---------------------------------------+---------------+--------+ |Master drive in two drive system | CLOSED | OPEN | +---------------------------------------+---------------+--------+ |Slave drive in two drive system | OPEN | OPEN | +---------------------------------------+---------------+--------+ J2 User Configurable Jumpers ------------------------------- +-----------------------------------+--------------+--------+ | Function | Jumper |Position| +-----------------------------------+--------------+--------+ |Auto park enabled | J2/jumper 6 | OPEN | +-----------------------------------+--------------+--------+ |Auto park disabled | J2/jumper 6 | CLOSED | +-----------------------------------+--------------+--------+ |For use with common BIOS | J2/jumper 2 | OPEN | +-----------------------------------+--------------+--------+ |For use with Compaq BIOS | J2/jumper 2 | CLOSED | +-----------------------------------+--------------+--------+ J2/jumper 3-5 are test jumper and should be set "open".