D O R S - 3 2 1 6 0 S C A IBM Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | | | Capacity form/unform 2160/ MB Heads 5| | | Seek time / track 8.5/ ms Sector/track | | | Controller SCSI3 SI/WI/FA20/SCA Precompensation Cache/Buffer 448 KB SEGMENTED Landing Zone Data transfer rate 5.500 MB/S int Bytes/Sector 512 40.000 MB/S ext SYNC Recording method operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 65 Power: sleep W Humidity % 8 90 | 5 95 standby W Altitude km -0.300 3.000| -0.300 12.000 idle W Shock g 5 | 75 seek W Rotation RPM 5400 read/write W Acoustic dBA spin-up W ECC Bit SMART MTBF h 800000 Warranty Month Lift/Lock/Park YES Certificates FCC,VDE ********************************************************************** L A Y O U T ********************************************************************** IBM DORS-31080/32160 ULTRASTAR ES JUMPER SETTING +---------------------------------------------------------+ | +------------ | | JP12+++ |XXI | : | | |XXN | : | | Logic Card |XXT | JP1 +++ |XXE | | |XXR | | |XXF | | |XXA | | |XXC | | |XXE | +------+ |XX | +----- |XX | Under Side of the Drive | | |XX Power | |XX +---------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** IBM DORS-31080/32160W ULTRASTAR ES JUMPER SETTING Jumper Setting ============== +--------+ GROUND ----+o JP1 o+---- DAS4 SCSI ID MSB GROUND ----+o JP2 o+---- DAS2 GROUND ----+o JP3 o+---- DAS1 GROUND ----+o JP4 o+---- DAS0 SCSI ID LSB GROUND ----+o JP5 o+---- Disable Auto Spin UP GROUND ----+o JP6 o+---- Enable SCSI Terminator GROUND ----+o JP7 o+---- Disable Unit Attention GROUND ----+o JP8 o+---- Reserved GROUND ----+o JP9 o+---- Enable Auto Start Delay GROUND ----+o JP10 o+---- Delay Start 6/12 GROUND ----+o JP11 o+---- Disable SCSI Parity Check LED Anode ----+o JP12 o+---- LED Cathode +--------+ SCSI ID ------- +----------+-------------------------------+ | SCSI ID | Jumper Location | | | PINS | | | DAS4 | DAS2 | DAS1 | DAS0 | +----------+-------+-------+-------+-------+ | 0 | OPEN | OPEN | OPEN | OPEN | +----------+-------+-------+-------+-------+ | 1 | OPEN | OPEN | OPEN | CLOSED| +----------+-------+-------+-------+-------+ | 2 | OPEN | OPEN | CLOSED| OPEN | +----------+-------+-------+-------+-------+ | 3 | OPEN | OPEN | CLOSED| CLOSED| +----------+-------+-------+-------+-------+ | 4 | OPEN | CLOSED| OPEN | OPEN | +----------+-------+-------+-------+-------+ | 5 | OPEN | CLOSED| OPEN | CLOSED| +----------+-------+-------+-------+-------+ | 6 | OPEN | CLOSED| CLOSED| OPEN | +----------+-------+-------+-------+-------+ | 7 | OPEN | CLOSED| CLOSED| CLOSED| +----------+-------+-------+-------+-------+ | 8 | CLOSED| OPEN | OPEN | OPEN | +----------+-------+-------+-------+-------+ | 9 | CLOSED| OPEN | OPEN | CLOSED| +----------+-------+-------+-------+-------+ | 10 | CLOSED| OPEN | CLOSED| OPEN | +----------+-------+-------+-------+-------+ | 11 | CLOSED| OPEN | CLOSED| CLOSED| +----------+-------+-------+-------+-------+ | 12 | CLOSED| CLOSED| OPEN | OPEN | +----------+-------+-------+-------+-------+ | 13 | CLOSED| CLOSED| OPEN | CLOSED| +----------+-------+-------+-------+-------+ | 14 | CLOSED| CLOSED| CLOSED| OPEN | +----------+-------+-------+-------+-------+ | 15 | CLOSED| CLOSED| CLOSED| CLOSED| +----------+-------+-------+-------+-------+ The jumper positions of DAS0, 2, 3 and 4 define SCSI Ids of the drive. JP5 Disable Auto Spin UP ------------------------ JP5 OPEN The drive will spin up automatically after power on reset. CLOSED The drive will not spin up unless the host issues START/ STOP UNIT command with the start bit set to 1. JP6 Enable Terminator --------------------- JP6 CLOSED The internal SCSI active terminator is turned on. JP7 Disable Unit Attention -------------------------- JP7 CLOSED Unit Attention after power on reset or SCSI bus reset is disabled.