D D R S - 3 9 1 3 0 W S 9 E S IBM Native| Translation ------+-----+-----+----- Form 3.5"/SLIMLINE Cylinders | | | Capacity form/unform 9130/ MB Heads 10| | | Seek time / track 7.5/ 2.6 ms Sector/track | | | Controller SCSI3 SI/WI/ULTRA Precompensation Cache/Buffer 384 KB Landing Zone Data transfer rate 10.000 MB/S int Bytes/Sector 512 20.000 MB/S ext SYNC Recording method operating | non-operating -------------+-------------- Supply voltage 5/12 V Temperature *C 5 55 | -40 65 Power: sleep W Humidity % 8 90 | 5 95 standby W Altitude km -0.300 3.000| -0.300 12.000 idle W Shock g 65 | 175 seek W Rotation RPM 7200 read/write W Acoustic dBA spin-up W ECC Bit ENHANCED, ON THE FLY,SMART MTBF h Warranty Month Lift/Lock/Park YES Certificates ********************************************************************** L A Y O U T ********************************************************************** IBM DDRS-34560/39130 ULTRASTAR 9ES +---------------------------------------------------------+ | +------------ |XX | JP12+++ |XXI | : | | |XXN | : | | Logic Card |XXT | JP1 +++ |XXE | | |XXR | | |XXF | | |XXA | | |XXC | | |XXE | +------+ |XX | +----- |XX1 | Back Side of the Drive | | | | | +---------------------------------------------------------+ ********************************************************************** J U M P E R S ********************************************************************** IBM DDRS-34560/39130 ULTRASTAR 9ES JUMPER SETTING Jumper Setting ============== OPTION BLOCK Jumper Setting Jumper position and function are as shown below. Pin pitch is 2mm. +-------------- Enable Auto Spin Up Device ID | +--------- Enable SCSI Term. (50/68-pin Model) +---+---+---+ | | +---- Unit attention Disable | | | | | | | +--------------- Enable TI-SDTR/WDTR | | | | | | | | +----------- Auto Start delay | | | | | | | | | +------- Delay start 6/12 | | | | | | | | | | +--- Disable SCSI Parity | | | | | | | | | | | Check JP1 JP2 JP3 JP4 JP5 JP6 JP7 JP8 JP9 JP10 JP11 +- LED Cathode +--++--++--++--++--++--++--++--++--++--++--++--+JP12 |24||22||20||18||16||14||12||10||08||06||04||02| +--++--++--++--++--++--++--++--++--++--++--++--+ +--++--++--++--++--++--++--++--++--++--++--++--+ |23||21||19||17||15||13||11||09||07||05||03||01| +--++--++--++--++--++--++--++--++--++--++--++-++ +----+---+---+---+---+---+---+---+---+---+ +- LED Anode Ground NOTE JP1 is reserved on 50-Pin Models! SCSI ID - 16-Bit Models ----------------------- +----------+-------------------------------+ | SCSI ID | Jumper Location | | | PINS | | | JP1 | JP2 | JP3 | JP4 | +----------+-------+-------+-------+-------+ | 0 | OPEN | OPEN | OPEN | OPEN | +----------+-------+-------+-------+-------+ | 1 | OPEN | OPEN | OPEN | CLOSED| +----------+-------+-------+-------+-------+ | 2 | OPEN | OPEN | CLOSED| OPEN | +----------+-------+-------+-------+-------+ | 3 | OPEN | OPEN | CLOSED| CLOSED| +----------+-------+-------+-------+-------+ | 4 | OPEN | CLOSED| OPEN | OPEN | +----------+-------+-------+-------+-------+ | 5 | OPEN | CLOSED| OPEN | CLOSED| +----------+-------+-------+-------+-------+ | 6 | OPEN | CLOSED| CLOSED| OPEN | +----------+-------+-------+-------+-------+ | 7 | OPEN | CLOSED| CLOSED| CLOSED| +----------+-------+-------+-------+-------+ | 8 | CLOSED| OPEN | OPEN | OPEN | +----------+-------+-------+-------+-------+ | 9 | CLOSED| OPEN | OPEN | CLOSED| +----------+-------+-------+-------+-------+ | 10 | CLOSED| OPEN | CLOSED| OPEN | +----------+-------+-------+-------+-------+ | 11 | CLOSED| OPEN | CLOSED| CLOSED| +----------+-------+-------+-------+-------+ | 12 | CLOSED| CLOSED| OPEN | OPEN | +----------+-------+-------+-------+-------+ | 13 | CLOSED| CLOSED| OPEN | CLOSED| +----------+-------+-------+-------+-------+ | 14 | CLOSED| CLOSED| CLOSED| OPEN | +----------+-------+-------+-------+-------+ | 15 | CLOSED| CLOSED| CLOSED| CLOSED| +----------+-------+-------+-------+-------+ SCSI ID 8-bit Models -------------------- +----------+-----------------------+ | SCSI ID | Jumpers | | | JP2 | JP3 | JP4 | +----------+-------+-------+-------+ | 0 | OPEN | OPEN | OPEN | +----------+-------+-------+-------+ | 1 | OPEN | OPEN | CLOSED| +----------+-------+-------+-------+ | 2 | OPEN | CLOSED| OPEN | +----------+-------+-------+-------+ | 3 | OPEN | CLOSED| CLOSED| +----------+-------+-------+-------+ | 4 | CLOSED| OPEN | OPEN | +----------+-------+-------+-------+ | 5 | CLOSED| OPEN | CLOSED| +----------+-------+-------+-------+ | 6 | CLOSED| CLOSED| OPEN | +----------+-------+-------+-------+ | 7 | CLOSED| CLOSED| CLOSED| +----------+-------+-------+-------+ Shipping Default is ID6 ********************************************************************** I N S T A L L ********************************************************************** -ANY DIREC. Notes on installation ===================== Installation direction ---------------------- horizontally vertically +-----------------+ +--+ +--+ | | | +-----+ +-----+ | | | | | | | | | +-+-----------------+-+ | | | | | | +---------------------+ | | | | | | | | | | | | | | | | | | +---------------------+ | +-----+ +-----+ | +-+-----------------+-+ +--+ +--+ | | | | +-----------------+ The drive will operate in all axis (6 directions).