Data bus:	16-bit, ISA
Size:	Half-length, full-height card
Hard drive supported:	Two IDE(AT) or one IDE(XT) Interface drives
Floppy drives supported:	Two 360KB, 720KB, 1.2MB, or 1.44MB drives

CONNECTIONS
Function	Location
Game port	CN1
40-pin IDE(AT) Interface connector	CN2
34-pin control cable connector-floppy drive	CN3
10-pin serial port (COM2/4) - internal	CN4
10-pin serial port (COM1/3) - external	CN5
25-pin parallel port (LPT1/2) - external	CN6
2-pin connector - Drive active LED	JP1

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Serial port 1 enabled	JP2	pins 1 & 2 closed
	Serial port 1 disabled	JP2	pins 2 & 3 closed
»	Game port enabled	JP3	pins 1 & 2 closed
	Game port disabled	JP3	pins 2 & 3 closed
»	Floppy drive enabled	JP4	pins 1 & 2 closed
	Floppy drive disabled	JP4	pins 2 & 3 closed
»	Parallel port address = 378h	JP5	pins 1 & 2 closed
	Parallel port address = 278h	JP5	pins 2 & 3 closed
»	IDE interface enabled	JP6	pins 1 & 2 closed
	IDE interface disabled	JP6	pins 2 & 3 closed

USER CONFIGURABLE SETTINGS
Function		Location	Setting
»	Serial port 2 enabled	JP7	pins 1 & 2 closed
	Serial port 2 disabled	JP7	pins 2 & 3 closed
»	Hard drive installed	JP8	pins 2 & 3 closed
	Hard drive not installed	JP8	pins 1 & 2 closed