DATA TECHNOLOGY CORPORATION

DTC2132D

Data bus:

32-bit PCI

Size:

Half-length, half-height card

Hard drive supported:

Four IDE(AT) or EIDE interface drives

Floppy drives supported:

None

CONNECTIONS

Function

Location

10-pin DTC-1415 ISA B Interrupt adapter connector

J1

4-pin connector - drive active LED

J2

40-pin connector - primary IDE(AT) interface

J3

40-pin connector - secondary IDE(AT) interface

J4

Note: Connector J1 is intended for use in systems that do not support redirected PCI interrupts.

USER CONFIGURABLE SETTINGS

Function

Location

Setting

»

Primary port INTA redirect to IRQ14

W1/pins 1 & 3

closed

 

Primary port INTB redirect to IRQ14

W1/pins 2 & 4

closed

 

Primary port INTC redirect to IRQ14

W1/pins 3 & 5

closed

 

Primary port INTD redirect to IRQ14

W1/pins 4 & 6

closed

 

Secondary port INTA redirect to IRQ15, IRQ12 or IRQ11

W2/pins 1 & 3

closed

 

Secondary port INTB redirect to IRQ15, IRQ12 or IRQ11

W2/pins 2 & 4

closed

 

Secondary port INTC redirect to IRQ15, IRQ12 or IRQ11

W2/pins 3 & 5

closed

 

Secondary port INTD redirect to IRQ15, IRQ12 or IRQ11

W2/pins 4 & 6

closed

»

Fixed IDE address at power-up (1F0-1F7h)

W3

closed

 

Relocatable IDE address at power-up

W3

open

»

IDE decode state disabled after reset

W4

closed

 

IDE decode state enabled after reset

W4

open